Ready to use mortar to join up Caraterra's
pavements and curbstones.
Use DALL’JOINT for the joints of your Caraterra's Environment
tiles and pool curbstones
DALL’JOINT protects concrete floors by limiting the water infiltration
risks in between the tiles and curbstones. The DALL’JOINT comes
in the same colour-ways as the CARATERRA'S environment tiles and
curbstones.
All Caraterra's pavements and curbstones paved on concrete floor.
Moist the floor before use. As paving progresses, mix the DALL’JOINT
with 3 or 4 liters of water per bag. Apply DALL’JOINT with either
a gauging trowel or jointer so the powder mix will penetrate profoundly
into the joint. Finish with a trowel or jointing tool to smoothen the
surface. All spilled DALL’JOINT putty must be cleaned immediately.
Clean the tiles carefully as you progress paving, and change the rinsing
water regularly. Average consumption : 2kg/m². Weather conditions
for the use of DALL’JOINT putty : from +15°C to +30°C.
Do not use in the full heat of the sun, while raining, on a frozen floor,
while thawing or when frost is announced within 24 hours. Do not use
under 8°C in order to avoid efflorescence.
Hardened density : approx. 1,5
Adherence on concrete : superior to 0,3
Mpa
Incombustible.
pH :2 + 0.5 at recommended use dilution
1 year in original unopened packing, stored in a dry place.
25 kg watertight bags
Not regulated.For further information, consult our Safety data sheet.
