|

DALL’EFFLO is particularly suited for the final treatment of exposed
concrete surfaces, such as : Grey or white smooth concrete, washed aggregates,
architectural concrete, tinted concrete, etc.Experience shows that best
results are obtained when applied on concrete that has been poured for
20 or 30 days. This time is necessary for carbonation evolution. It is
better to wash after this period to preserve the clear appearance of
the concrete.
DALL’EFFLO can also be used for cleaning calcium deposits
from all non-metallic supports, such as crockery film, glaze, plastic,
etc. It also suppresses micro algae incrustations on these supports.
DALL’EFFLO must be diluted in a proportion of 100 g/l. In difficult
cases, it is possible to increase the proportion to 150 g/l. The diluted
solution can be applied on previously wetted concrete, with a brush,
sponge or a sprayer. After 5 or 10 minutes of exposure time, it is necessary
to rinse out abundantly.For cleaning concrete facades with DALL’EFFLO,
please consult our specifications note related to this use.
Before any
use, see the list of materials on which DALL’EFFLO can be applied
without danger. Specifications note approved by SOCOTEC N° 93.008.7604

Protect the vegetation against projections and infiltrations in the ground
because of its temporary weeding effect.
White powder, miscible with water.
Recommended dilution : 100-150 g/l.
Non inflammable.
pH :2 + 0.5 at recommended use dilution.
5 years in unopened original packaging.
1kg bucket.
Irritant for skin and eyes.
Contact with eyes: wash with water.
Harmful for aquatic organism.
For further information, consult our Safety data sheet.
Class : 8
Land T : ADR n° =
16°C
Sea T : IMDG n° = 8229
Air T : UN n° = 2967 |
 |
|