Protects
from oil infiltration in concrete floors previously treated
with Dall'Fug.
APPLY
FIRST:
Dall'fug then, Dall'tach
Reinforces the protection of concrete surfaces against all types
of stains: oil, fat, various foodstuffs.
Allows fast, simple dirt removal by preventing encrusting in the
surface.
The product is to be applied after treatment with DALL’FUG
in order to create a highly effective oil repellents, non film forming
impregnation.
The protection must be applied locally to areas likely to be dirtied
by fat stains : terraces, dining areas, barbecue, parking areas.
Does not modify the colour of the treated concrete.
Support treated by DALL’FUG more than
24 hours earlier.
The oil repellent treatment may be partial, and reserved for areas likely
to be affected by fat stains.
Ready to use
Apply with a roller or spray on entirely dry surface which has been treated
more than 24 hours earlier by DALL’FUG. Do not apply in rainy weather.
Upper and lower support and air.
Temperature limits during application: +5°C to +35°C;
Usual consumption: 5 to 8 sqm/l ; with very absorbent or heavy duty supports,
apply a second coat once the first has dried.
DALL' TACH must be completely impregnated in the floor, it is thus appropriate
to avoid any excess (in particular in hollows).
Maintenance: we advise to clean with water under pressure the treated
zones at the beginning of spring and apply a new DALL' TACH layer.
Cleaning of material with water before drying.
• Transparent aqueous solution
• Density : 1.00*0.02
• Viscosity : <7 cSt , Iso cup 2431 N° 3 at 20°C;
• Drying Time : 3-4 hours at 20°C and 50% RH - 5-6 hours at
15°C and 50% RH;
1 year in original packaging.
5 liter plastic jerry can.
Not regulated.
For further information, consult our Safety data sheet.
